1. Look at the selection of artificial wood veneer or natural wood veneer
The two are easy to distinguish: the texture of the artificial wood veneer is regular, the natural wood veneer is a natural wood pattern, the texture pattern is natural and irregular. As for the melamine veneer, since the substrate is a MDF without the plywood layer, it is easy to distinguish.
2. The back panel is very important
The veneer should pay attention to the material of the back plate. The common wood, the best of the poplar, the easy to drum of the paulownia wood. Not too good.
3. Check the surface and pattern of the veneer
First of all, the performance of the veneer should be smooth, intact, no dead knots, no excavation, no sand marks, indentations, no surface stains and other defects. Secondly, the texture of the high-quality plaque should be meticulous and uniform, the color is clear, the appearance is beautiful, and the symmetry is basically. If the pattern is not good or unnatural, it will not look good in the future.
4. See the adhesion of the patch to the substrate
First look at the wood color, the wood color of the substrate and the patch should be similar, no obvious color difference. Next, look at the glue. Bubbling, delamination, and degumming should not occur between the veneer and the substrate and the layers inside the substrate. You can use a sharp flat blade to rub along the glue layer. If the glue layer is easily damaged, but the wood is intact, the glue strength is poor.
5. smell smell
If the board has a strong odor, it means that the amount of formaldehyde released exceeds the standard and should not be purchased. When purchasing, you should ask the merchant for a test report to see if the product meets environmental standards.
6. Check the quality of the base and surface veneer
The price of wood veneer is determined by two factors: one is the substrate, and the better the substrate, the more expensive. The second is veneer material, the rarer the veneer tree, the more expensive the wood veneer; the thicker the veneer, the more expensive the veneer. The prices of different wood veneers vary widely. The quality of the veneer can be judged from the following two aspects.
(I) Look at the thickness. The specifications of the national standard veneer commonly used in home decoration are: the thickness of the surface veneer is 0.2-0.3mm (including natural veneer and technical veneer), and the total thickness of the veneer is 3mm, but the thickness of the wood veneer on the market is 2.5~. 2.8mm. The national standard veneer is more expensive than the non-national standard. You can use a ruler to measure it when you buy it.
The thicker the surface veneer as the veneer, the stronger the solid wood feel after the paint is applied. Too thin will pass through the bottom and change, affecting the appearance. The thickness of the veneer veneer can be directly observed from the edge of the plate. In addition, a few drops of water can be dripped on the surface of the panel. If the bottom is exposed, the veneer is thinner.
(2) Look at the substrate material. The substrate is preferably eucalyptus, but the price is also high. In addition, the thickness and water content of the base layer should meet the national standards and be treated with alkali. A poor substrate is easily deformed and tilted on four sides when the humidity of the air changes.
In order to prevent the purchase of inferior products, it is necessary to pay attention to the purchase of regular manufacturers of complete marks (category, grade, manufacturer name, etc.), only the complete plate can get the quality assurance.
7. Water drop method to measure color
After the decorative panel is attached to the furniture, it must be painted, so that it will become radiant. Painted veneer. Its color will become darker. If you want to know what color it is ultimately, you can drop a few drops of water on the veneer when you buy it. The color at this time is similar to the color of the finished paint.
8. Don't pay too much attention to the surface wood species
There are many veneer trees on the veneer, such as ebony, red sandalwood, sapele, rosewood, black walnut, white oak, red peony, cherry wood, etc., which are dazzling and the price varies depending on the degree of rareness. You don't have to worry about which kind of wood to choose, because they only have a thin layer, they will play a decorative role and have little effect on the decoration. All you have to do is choose the color you like and the right price.
Shenzhou home plate special reminder:
(1) Wood veneer should be protected during transportation and during construction, because if the board is stained or worn after leaving the factory, the merchant will not accept the return. After the formal decoration company enters the wood veneer panel, it will immediately apply a varnish to protect the panel.
(2) When the wood veneer panel is not enough for replenishment during construction, it is best to bring a scrap of the original panel to avoid the color difference between the newly added wood veneer panel and the original wood veneer panel.
Hands-free Wall Mounted Toilet Brush
Plastic Toilet Brush
ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com