At present, with the continuous development of the wooden door market, the wooden door is deeply loved and concerned by consumers, but some consumers complain after the wooden door is purchased. Although the wooden door product itself has certain influencing factors, the focus is still on the purchase of wooden doors. Misunderstanding. So, buy the seven wrong areas of the wooden door! I hope you won't know.
1. Think solid wood door is the first choice
Chinese people tend to love solid wood products for ten minutes, but they ignore the natural properties of wood. The stability of solid wood doors is not strong, and it is more prone to door deformation, fission of joints and surface cracking than other types of doors. In fact, the performance of solid wood composite doors with good environmental performance is not worse than that of solid wood doors, and even the stability will be better than solid wood doors.
2. Pick trees by weight?
It is impossible to judge the inner of the product from the weight alone. The weight of the particleboard is sometimes heavier than that of the solid wood. Although the raw material used to make the particleboard is broken wood, a lot of adhesive is applied during the production process. After the adhesive is cured, it accounts for a considerable proportion of the plate. Its weight is not light. In addition, due to the difference in the size and thickness of the door leaf and the filler of the door core, it also causes the weight of the wooden door to be different. Therefore, the specific weight is not the most reasonable basis for judgment.
3. Low price is king
Wooden doors are not the same as other goods. Consumers can only see the surface of the door, and its internal quality cannot be judged. Even if it is an expert, it is sometimes difficult to judge the internals of the wooden door by observing the appearance. It is recommended that the consumer not only look at the price of the cheap, but ignore the inherent quality of the product. The environmental performance of the door is extremely critical. Consumers should choose expensive paint-free doors instead of buying cheap solid wood composite doors, so that environmental protection performance is more secure.
4. Judging the door core material through the door lock hole
Some "smart" consumers observed that the door locks of wooden doors were installed on site, so many people thought, why not observe the core material of the wooden doors purchased through the door locks? However, in the manufacturing process of the wooden door on the market, in order to make the lock more secure after installation, the strength of the door lock hole area is strengthened, and most of the lining is used. Therefore, the wooden door is inspected through the hole of the door lock. The core material is not very realistic.
5. Focus only on the door leaf, don't care about the door cover
When consumers choose wooden doors, they often only pay attention to the quality of the door leaf. However, many of the after-sale problems of wooden doors are actually from the door sets. There are three kinds of solid wood multi-layer door covers, MDF door covers and solid wood door sets on the market. The waterproof and moisture-proof performance of the MDF door cover is relatively poor, and it is easy to cause the wooden door to sink and scrape. The solid wood door cover is generally tooth-joined, and the Screw is easy to form a smashing phenomenon. The best choice for solid wood composite doors is the standard door panel with solid wood multi-layer board, which can guarantee the service life of wooden doors.
6. Never allow color difference
At present, some consumer complaints received by merchants are concentrated on the problem of color difference, but the problem of color difference cannot be completely avoided. For example, the paint-free door of the same suit may have different colors due to the different batches of the cover material, and it may happen that the color seen by the consumer in the store is slightly different from that at home. This is especially true for solid wood veneer paint doors, where the wood veneer is taken from different parts and the age of the wood is different, and the color of the cut pattern is not the same. The same is black walnut, some may be darker in color, may be shallow, which is caused by the natural properties of wood; the difference in the number of paints and the difference in the color of each paint may cause slight deviation of color. Therefore, consumers should not excessively pursue wooden doors without chromatic aberration.
7. If the wooden door cracks, it is required to return the goods.
From the perspective of protecting the environment and conserving resources, it is recommended that the wooden door products have problems. It is normal for the paint door to have fine cracks. Wood has the characteristics of shrinkage and swelling, which is a natural defect of wood. This problem has been difficult to overcome since ancient times. The current technical means can only minimize the occurrence of cracks, but it is impossible to completely eradicate it. The fine cracks in the paint door can be solved by maintenance. The return to the factory is not the only way. Some minor problems can be repaired in the consumer's home. At the same time, the "Wood Door Repair, Replacement, Return Specification" will be introduced soon, and the specification will require the wooden door to perform repairs, replacements or returns under more circumstances.
The above is an introduction to the seven misunderstandings of buying wooden doors. If you want to buy a suitable wooden door, these buying mistakes must be understood and avoided, so that you can be comfortable on the wooden door.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Non-tapping screws are machine screw, the pieceworker to be fastened must be tapped with taps in the screw hole in advance to match the screw threads.
The difference between tooth screws and other screws depends on whether they can be used together with nuts. Tooth screws can be used with nuts. And relative to the screws of other teeth, there are self-tapping screws. The nut of this kind of screw has no bow teeth. As for the standard teeth and fine teeth are only different pitch, it is the nut of the machine screw
Hex Machine screw,pan machine screw,flat machine screw,truss machine screw,Hexagon socket screws
Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com