Printing equipment operation regulations

Equipment operation regulations mainly refer to the specifications and requirements related to equipment management and operation.

1. All equipment must be managed by a dedicated person, and a system of fixed-person and fixed-point management is implemented.

2. Operators must go through technical training, learn about the technical structure of the equipment, performance, use, repair and maintenance and technical and safe operating procedures and other business technical knowledge before the machine, and only those who pass the assessment can operate independently.

3. The production equipment implements the captain responsibility system.

4. During the operation of the equipment, there are hidden troubles that need to be reported, inspected and repaired in time to prevent the equipment from "sick" production.

5. Equipment accidents should be protected at the scene, reported and dealt with in a timely manner, failure to report and damage to the accident site should be dealt with seriously, and economic penalties should be imposed depending on the circumstances.

6. It is forbidden to open other people's machines indiscriminately, or to adjust the machine's time relationship and other important key components. Repairing and adjusting machines must be handled strictly in accordance with the duties and responsibilities of the post. Unauthorized personnel are not allowed to use, adjust, or repair equipment.

7. New workers should be able to operate the equipment under the guidance of relevant personnel.

8. It is not allowed to use the precision machine for rough use. It is strictly forbidden to overload the equipment and use it in excess of specifications. Processing, installation and fixtures should be shut down. It is not allowed to dismantle safety devices and parts at will. When the power supply is interrupted, the power of the machine should be cut off immediately to restore all handles and handles to a safe position.

9. Before leaving work, the operator must record the problems and abnormal conditions found in the operation of the machine in detail in the handover shift book according to the project, so that the relevant personnel and the successor can understand the equipment status.

10. Once the equipment accident occurs, the power supply should be cut off immediately, keep the site intact, and immediately report to the equipment supervisor. Immediately afterwards, the rescue personnel were carefully and promptly rescued, and the workshop supervisor, equipment supervisor, machine repair personnel, and operating workers were investigated and analyzed. Major accidents should be reported to the higher authorities. For the equipment accidents, the “three failures” must be done: that is, the accident causes are unclear; the accident victims and the majority of employees will not be overlooked without education; and they will not be overlooked without preventive measures. Fill in the "Equipment Incident Report Form" within three days of the accident.

11. Without the consent of the leader, others are not allowed to use the equipment they use.

12. Before starting the equipment, all parts must be checked, and everything is normal before driving.

13. During the operation of the equipment, you should always observe the operation of each department. If there is any abnormality, you should immediately stop the inspection and analyze and deal with the maintenance personnel.

14. Perform equipment maintenance as required.

Yoga Exercise

Yoga Squats And Hips,Hard Pull Boost Colorful,Deep Plastic Elastic Band,Adult Shoulder Pull Band

Yangzhou Sainuo Star Sports Products Co., Ltd. , https://www.cnsportsgoods.com