Case Design Analysis of Packaging Box (4)

12, select the ellipse tool, draw a circle at any place, size is set to 5 x 5mm, and then move it to the top right corner of the flip C, as shown in Figure 11:


At this point you should use the frame mode of view, and try to enlarge the graphics to accurately position.

13, use the shape tool, in the flip C on the right side of the circle and the upper side of the circle, double-click to increase a node (red circle 1 and red circle 2), and then double-click the node (red ring 3) on the vertex to delete the node, Make it a straight line, as shown in Figure 12:


14, continue to call the shape tool, click on the red circle 1 and red circle 2 interval line, and then click on the property toolbar, the conversion line for the curve tool button, and then align this circle with the circle as the benchmark align the outer edge of the circle, so that The line becomes a circular line, and then the reference circle is removed. This corner becomes a round solution, as shown in Figs. 13 and 14.



(to be continued)

Led Bar Counter

Bar Chair,Led Bar Counter,Illuminated Led Bar Counter

LED Bar Furniture,LED Cube Co., Ltd. , http://www.cn-ledbar.com