Cast iron copper gate , this product, I believe that most people do not understand it, in fact, it is still widely used in our industrial field, every day we will through the introduction of cast iron copper gate , to understand it !
How about cast iron gate with copper
Cast iron copper-inlaid square gate is composed of door frame, gate, guide rail, sealing strip, transmission Screw, hanging block nut / ear lug, and adjustable sealing mechanism. The door frame and gate are made of high-quality gray cast iron or ductile iron The guide rails are arranged symmetrically on the left and right and are connected to the ends of the two sides of the door frame with stainless steel bolt positioning pins (for small and medium-sized gates, the guide rails can be cast into the door frame as one body). 3. Therefore, the overall structure has high strength, high rigidity, wear resistance, good corrosion resistance and large pressure bearing capacity.
Features of cast iron gate with copper
1. The gate is of vertical structure. There should be wedges on both sides of the gate to seal the water tightly and installed in the gate slot. The top of the gate has lifting lugs. It is connected to the screw of the hoisting machine by a shaft pin. The board moves up and down in the gate slot.
2. The gate should be able to withstand the normal hydraulic impact. The gate can move up and down flexibly in the gate slot, and can resume operation after a long-term shutdown. It has bidirectional force requirements.
3. The gate has good sealing water resistance, and the leakage is not more than 1.25L / min.m (sealing length).
4. The hoist is installed on the operating platform, the operating force of the manual crank is less than 150N, and the height above the ground meets the requirements of manual operation.
Precautions for installation of cast iron copper gate
After the gate is installed, the lubricating grease in the electric manual hoist should be inspected and refilled. Under waterless conditions, at least 3 door opening and closing tests should be performed. The operation is flexible and the handle is light. Position, sudden jump phenomenon, the limit is correct, the overload protection mechanism of the hoist should be sensitive and reliable.
I have introduced this to the cast iron gate with copper inlay . I hope to help you. More decoration information is available on this website, so stay tuned.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
All copper angle valve copper radiator shower set all copper copper floor drain how much money inlaid copper nuts
Baking rack,baking cooling mesh,baking cooling rack,cooling rack, steel wire cooling rack, etc.
Baking wire mesh is made of high quality 304 stainless steel, never rusting and durable. Cooling Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking rack: the wire mesh is mainly used for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.Baking rack,cooling rack,kitchen baking rack,stainless steel cooling rack,oven baking rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com