[China Network] customized wardrobe closet overall site production and woodworking, furniture store sales compared to the wardrobe, not only timber environmental protection, high color selectivity, but also tailored to the area and the consumer's individual needs room, it is understood At present, the pricing method of the whole wardrobe on the market mainly includes calculation according to the expanded area and calculation according to the projected area. Then, how is the pricing method of the customized wardrobe calculated?
Customized wardrobes generally have two types of pricing:
Customized wardrobe projection area algorithm
Regardless of how the interior layout of the wardrobe is set, how many partitions, the area of ​​the wall of the wardrobe projection multiplied by the unit price is the total price of the board. The earliest wardrobe manufacturers and current decoration companies generally charge in this way, but most of them must stipulate that the depth of the wardrobe should not exceed a certain size. If the partition is too much or the depth exceeds, it is necessary to add money, and the standard is not very uniform.
Customized wardrobe deployment area algorithm
This kind of calculation is the most common calculation method at present, that is, multiplying the total area of ​​all the plates of the wardrobe by the unit price is the total price of the plate. The advantage of this way is how much the plate costs, which is more transparent, and can determine how much the interior of the wardrobe is separated according to family habits. According to the expansion area calculation, pay attention to whether the backboard is charged and how to charge.
Case description:
First, calculate according to the projected area.
Assume that the cabinet is an 18-thick board, the back panel is 7 thick sheets, the drawer (or the pants rack is sent 2), and the projection is 268 square. The calculation is very simple, which is 1.94*2.815*268=1463.5, of course. If the drawer and the trousers are not delivered, the two items are counted as 70, and the two are 140, which increases the cost by almost 10%.
Second, according to the expansion area calculation.
1 drawer pants rack 2: 2*70=140, Yitong 2*10=20
2 18 thick board: 2*0.6*2.815+2*0.6*1.94+2*0.53*1.886+1*0.53*0.943+1*2.632*0.57=9.7
3 18 thick and the same body of the cabinet: this thing is different from the different calculation methods, some count the meter, some calculate the square (this cost-effective point), I still put him into the 18-thick board to calculate the square: 1 * 0.084 * 1.886+0.065*2+2*0.037*2.632=0.613
So, why do I say that if the sliver is the same as the square of the same material of the cabinet (note that different materials are definitely counted as meters), you see the 9.15 meter strip, which is only 0.613 square meters. The manufacturer is not worthwhile. Cut a lot, so the difference in quality is definitely the number of meters.
4 thin sheet behind: 5.46 square
So, how do we calculate it, according to the projection of 268, how much is the expansion of this drawing, generally the thin plate is 60% of the price of the cabinet board. Assuming that the price is X, we first calculate the case where the projected area is to be sent to the drawer. :
1463.5-140-20=X(9.7+0.613)+X*0.6*5.46
Solve: X=96
In other words, under the design of this figure, assuming a projection of 268 and sending 2 pumping, the unfolding price is 18-thickness of the wrench 96 square, and the back sheet 58 is one square.
If the above projection does not send the drawer:
X=106
How is this calculated clearly?
Others
Others
Changxing Mingwang Rubber & Plastic Technologies Co.,Ltd. , https://www.cxmingwang.com