[ Chinese wardrobe net ] Customized wardrobe measurement mainly has expansion method and projection method, then you know how to operate and execute it? How to calculate the calculated area of ​​the custom closet? If you want to buy a custom closet, the above problem is of course not sloppy. Xiaobian here gives you a detailed anatomical custom wardrobe measurement method, so the measurement is accurate.
First, the custom wardrobe preparation before the measurement
1, measuring tools
The main measuring tool 5M-7.5M steel tape measure
Auxiliary measuring tool 10M-20M leather tape measure
Essential tools for paper, drawing pens and other recording data
2. It is clear that the customer has completed all the decoration of the wardrobe installation area, including the floor, wall, ceiling, etc.
Second, custom wardrobe measurement methods
1, three-sided measurement
The "three-sided measurement method" is a plane measurement method, a facade measurement method, and a facade side view measurement method.
In the measurement process, you need to draw a sketch of the plane and elevation layout with a paper and pen, and then measure the size. The higher the accuracy of the measurement size, the better, and the error is not more than 3mm.
The measured data is recorded on the sketch and clearly marked. There must be no missing or unmeasured areas. Multi-point measurement is required for the measurement.
2, sliding door hole size measurement method
The dimensions of the sliding door opening should be accurate plus or minus 2mm. Only the correct size can produce the sliding door of the right size, in order to make the production more correct, the installation is more convenient, and avoid unnecessary loss.
The door hole size measurement method is as shown in the figure below. The multi-point measurement method such as height H1, H2, H3, width W1, W2 is used to measure the accurate sliding door hole size.
3, multi-point measurement method
The multi-point measurement method, also known as the three-point measurement method, obtains accurate data through multi-point measurement, and measures the room size without a doubt.
Editor's summary: The above is the measurement method of the custom closet, do you have a certain understanding of the measurement of the custom closet?
Water Pump For Koi Pond,Water Pump For Pond,High Watt Water Pump For Pond,Pond Water Pump
Shenzhen GAKO Aquatics Products Co., Ltd , https://www.gako-aquarium.com