China's future adhesive consumption demand hot

In the next 5-10 years, the adhesive consumption in China will still grow at a rate of 8%-10%, with the following development directions:

1. Low formaldehyde emission urea-formaldehyde rubber accounted for about 30% of the total amount of synthetic adhesives in China. With the improvement of people's living standards and environmental protection awareness, the environmental protection requirements for man-made boards will be higher. Therefore, low formaldehyde emission urea-formaldehyde adhesives The market has great potential. At present, foreign companies have produced low-formaldehyde emission urea-formaldehyde rubber in China and have also established large-scale wood processing plants.

2. Hot-melt adhesives do not use organic fluxes, and the rapid construction and good bonding effect are the fastest-growing plastics in recent years and are also the future direction of development. In addition to traditional EVA hot-melt adhesives, new varieties of polyester and polyamide hot-melt adhesives are urgently needed in China.

3. Polyurethane adhesives are widely used in footwear, packaging, construction, automotive and other fields, and because of its excellent performance, it is considered to be one of the most promising types of rubber in the country. In developed countries, plastics for shoemaking are all polyurethane adhesives, and all composite films for packaging use polyurethane adhesives. In addition, special adhesives such as tapes also use polyurethane adhesives, which shows that they are widely used.

4. Silicone Adhesives In developed countries, building seals mainly use silicone sealants. In the next few years, silicone sealants will also become the dominant rubber in construction sealants in China.

5. High Performance Epoxy Adhesives Epoxy adhesives for the electronics industry and epoxy structural adhesives for the construction industry are difficult to produce, and the quality of domestic products is poor. Currently, they mainly rely on imports. It is estimated that in the future, consumer demand in this area will greatly exceed the average growth rate.

6. Automotive PVC plastic melt adhesive PVC plastic adhesive is the main sealant for automobiles, accounting for about 1/3 of China's automotive adhesives. The current annual demand is about 10,000 tons, with the Chinese automobile industry, especially the car industry. Development, PVC plastic melt adhesive must have broad prospects for development.