[China] wardrobe network purchased the Heart of wardrobe cabinets installed properly qualified is very important, which will be related to life wardrobe cabinets age and aesthetics in the future.
The installation of cabinet wardrobes is generally carried out after the floor tiles are laid. Before the renovation, you should first customize the cabinet wardrobe in advance, so that the manufacturers can measure the size. Before the decoration, the drainage electricity should be arranged according to the installation requirements of the cabinet. The tiling should also be set according to the height of the countertop of the cabinet. It is also necessary to integrate the front exhaust pipe of the ceiling to be installed according to the layout of the hood. If it is an embedded gas stove, it must be Before the cabinet is manufactured, the size of the embedded unit is told to the manufacturer to pre-position the groove for installation.
First install the fixing nut on the fire board
Then snap between the two boards
Tripod
Install the upper frame guard
Waterproof membrane plate under the water hole
Mounting drawer fixing chute
Install the invisible handle slot
Installing the drawer
Drawer installed effect
Installation of linked baskets
Installation of paint door hinges
Install the door to the side panel
Install the tail basket slide rail and connecting frame
Installing the drawer panel
Draw lines, prepare to install the cabinet
Drill on the tiles
Knock in the set screw
Install the inner panel of the cabinet
Install the translation upturn moving parts
Grinding the quartz stone countertops to be installed
Gluing for bonding
Countertop polishing
Installation basin
Installing the cabinet panel
Install the surface of the countertop and seal the edge
Install water barrier
The cabinet installation is complete.
The following is a detailed installation of the overall wardrobe . Nowadays, the furniture made by the interior woodworker is unsightly due to the error of the size, and the paint is polluted, so it is gradually replaced by the customized wardrobe.
Wardrobe panel made to order according to pre-customized requirements and cloakroom size
Fix the cap like a cabinet
Good nuts ready to install the panel
Tightening the plate to the plate to secure the cap
Use the grooving on the back panel to move the backplane into
Sliding drawer
Adjust the hinge after installing the door panel to achieve the opening and closing of the door
Installing the guide rail of the moving door
Insert the door, the bottom of the door is the pulley. The height of the door can be adjusted by the side screws.
Door handle
Kitchen moving door installation anti-collision strip
In short, the installation of cabinet wardrobes is related to the normal use in the future, sloppy.
Desk And Chair,Table And Chair,School Student Desk,Kids Chair For School
AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com