The correct selection of inkjet ink and proper maintenance of the nozzle

The nozzles of inkjet printers are very expensive and precise. There are many tiny nozzles on the wide nozzles. So many nozzles directly face the printing consumables during printing and are exposed when they are not working. Since the size of the nozzle aperture is equivalent to the dust floating in the space, if the inkjet printer has a poor working environment with more dust, the fine nozzle can be easily blocked by the dust. If the indoor temperature is too high, not only is the expensive ink jet printer's components easily rusted, but even the nozzles are difficult to ensure that they are not rusted. The temperature range of the printer's operating environment should not be changed too much, because the inkjet printer not only contains a lot of The metal parts also include a large number of engineering plastic parts. The aperture of the nozzle is very slim. If the ambient temperature changes too quickly, the hot stamping of the component will cause excessive wear of the mechanical components. The nozzle aperture size also affects the print quality of the ink.

The problems that arise in inkjet printers are mainly focused on the ink cartridge nozzles. The inkjet printer has a large amount of ink, and after a long time, the ink has an effect on the nozzle and the printed image. The wear and ink deposits that occur when the nozzle is working for a long time also affect the quality of the printed image. Therefore, the correct selection of the ink and the correct maintenance of the nozzle are problems that cannot be ignored in the use of each inkjet printer user.

Therefore, the user should first select the ink. The quality of the ink determines the quality of the printed image and also determines the life of the nozzle. The manufacture of inkjet printer ink and its complex, whether it is original ink or compatible ink. The second is to do a good job of maintenance of equipment and nozzles. Sprinklers are most likely to get stuck due to prolonged use, improper use of ink, or clogging nozzles for long periods of inactivity. Of course, the use of a good quality ink can also cause the nozzle to be blocked and affect the print quality. In severe cases, it can even cause the entire nozzle to be scrapped. Although the nozzle manufacturing industry is fine. But its structure is not complicated. The plane in direct contact with the print media is filled with many tiny round holes. The nozzles are connected to the nozzles of the inserted ink cartridges. Frequently attached toner or foreign matter from the nozzles to the nozzles and around the nozzles can remove the toner and impurities, and the nozzles can resume normal printing functions. .

For inkjet printers that have been out of service for a long time (such as the National Day holiday). It is best to place the entire ink supply system of the inkjet printer after cleaning with cleaning fluid to avoid clogging of the orifice. Most seemingly scrapped sprinklers. Only the spout is blocked and does not work, only a simple flush is required to restore its print function. For the normal printing, but the lack of strokes or colors, or the blurring of the image under high-rate variation, this is usually solved by using the nozzle cleaning program that comes with the inkjet printer. However, it should be noted that once strokes are found missing, If the nozzle is clogged due to slight color or poor color, it should be cleaned with a cleaning procedure as soon as possible. During the printing process, the machine frequently flushes ink or cleans the orifices, but the printing effect is still poor or the nozzles are seriously blocked. The machine cannot charge ink, or the inkjet printer can only use the manual cleaning method when rejecting the work. Manual cleaning is not complicated, but Due to the need to wipe the nozzle, the frequency of cleaning should not be too frequent. The manual cleaning method uses a syringe and a rubber tube that can be put on the needle and a cleaning solution. About ten times the magnifying glass. Hard plastic knife and other tools. Remove the nozzle, use a magnifying glass to carefully find the nozzle is blocked jet nozzle, and then use the syringe to inject the cleaning fluid into the nozzle hole, if necessary, can be scraped with a hard plastic knife to remove the residue of the nozzle hole, when using the electrode to avoid contamination.