Wood grain
Some work furniture will have uneven wood grain appearance, but if you look carefully, whether it is rubbed with a wire brush is correct with the original wood grain. The new imitation of the hard-grained wood grain always has an unnatural feeling.
2, look at the traces of the legs
Watch for signs of fading and dampness. Especially in the wet areas in the south, the furniture is usually placed directly on the mud, which will be the case for a long time.
3, see if the patina is natural
Generally, in the orientation that the user's hand often touches, a natural composition of the patina is presented. The new imitation of the patina is either not natural or made in the local area that is not often touched.
4, look at the bottom plate and drawer board
For example, the old table and the boring cabinet, the bottom plate and the drawer board have a new atmosphere that the new imitation can't reach. Old goods are also painted matte black paint, but certainly not angry. Then look at the drawer side panel, there should be a chamfer line on the side, so as not to hurt the hand. Another point is very important - look at the alum, the blink of an eye is square, the tip of the hoe is locked. If you see the round ends of the blink, it means that it is machined, it must be a new imitation.
5, see copper jobs
If the copper work of the old furniture is original, it should be rubbed for decades or even hundreds of years. The copper job includes a face page, a hinge, a hinge, a handle, a wrap angle, a bezel, a lock surface, etc. Some of the better-made furniture will also be made of white copper, which will be fascinating for a long time. . Some kinds of pictures will be drawn on some copper pieces, such as animals, flowers, auspicious characters, etc. The craftsmanship is hard to be imagined by today's coppersmiths. Some folks with very interesting pictures can also distinguish the regional style and the style of the times, and then obtain valuable humanistic information.
There are still some copper jobs that are too long. Although there is no patina, they will leave traces of rust, and some green rust will appear. Perhaps the surface is as rugged as the plate of corroded prints. These are the key points to distinguish the authenticity of old furniture. one.
6, see the traces of renovation
There are some cloth chairs in the old furniture. After the innovation, the original chair ring will leave a row of nail holes. This chair is old. Some rattan chairs, the original vine surface is rotten, leaving the eyes of the vines, and you can see them when you turn them over.
7, look at the carvings
From the level of style and carving. When the furniture is manufactured, it is put wider in working hours, and the craftsman's mentality is also quite quiet, fine and fine, round and natural. Nowadays, in order to reduce the cost of new imitation furniture, it is often rushed to the moment, and there will be loopholes in the carving. In Chinese office furniture, the round is not smooth, and it is not hard. The border decoration of Western furniture will also show the situation of cutting corners.
Oven Plate glass
Oven Plate glass
Xi'an ATO International Co., Ltd , https://www.xianato.com