In general, equipment should not be added blindly unless the user's requirements are met. However, there must be no environmental testing equipment. Otherwise, there is a risk of being eliminated in a world that demands reliable products. Most electronics companies purchase vibration test benches to check if their products meet basic standards. Only one type of vibration test bench is capable of performing accurate and meaningful vibration tests on a product, whether it's a power frequency vibration test bench or a simulated car transport test bench. As a result, many electronic companies still operate at lower requirements.
When choosing a vibration test bench, most users only need an electric vibration test bench to perform vibration environment tests on their products.

If a product is intended for aerospace use, it must undergo vibration testing with acceleration. This is because different accelerations occur during the ascent and descent in space. Without proper environmental testing equipment, the product’s reliability cannot be guaranteed. However, it’s worth noting that the state has not yet required vibration test rigs to go through formal approval processes. Therefore, many power frequency vibration test benches and simulated automobile transport test benches on the market have not been officially certified. Some manufacturers even use the simplest power frequency vibration test benches. The higher the requirements, the more capital is needed.
Today’s vibration test requirements for electronic products vary widely. Most do not require aerospace-grade testing, so they don’t need acceleration testing. Many companies only use basic power frequency vibration test benches or add simple simulated car transport test benches. However, if the product is to be installed on a spacecraft, more rigorous environmental testing equipment is necessary. At that point, the product will face significant impact and vibration, requiring specific acceleration performance from the electric vibration test bench. In addition, other tests such as various impact tests may also be required. I once attended a conference on vibration products in the sea, and over 100 attendees were military personnel—only I was from the civilian sector.
The scale of China’s vibration test benches is primarily based on national standards, which refer to general sinusoidal vibration.
Vibration test requirements vary across countries and users. Some only need basic electrical vibration tests, while others must conduct comprehensive vibration tests under conditions like high and low temperature, damp heat, and shock. The controllers involved can be more complex. Some products also require impact testing. There is also random vibration testing, which is performed after completing sinusoidal vibration tests. We can’t expect civilians in the electronics industry to face the same level of “harshness†as military applications.
In the electronics industry, the vibration tests we refer to typically involve general sinusoidal vibration environment testing. This means placing the product on a vibration test bench and subjecting it to vertical vibrations, then rotating or turning the product to simulate three-axis vibration environments. Some tests require frequencies as low as one or two times per second, as these frequencies are relevant in real-world applications.
20 pins hdyra stamp, 64 hydra stamp, 16 golden pins hydra derma stamp, nano derma stamp, titanium derma stamp
20 pins hdyra stamp, 64 hydra stamp, 16 golden pins hydra derma stamp, nano derma stamp, titanium derma stamp
Guangzhou Vantee Electronic Technology Co., Ltd. , https://www.finerroller.com