[ Chinese wardrobe net ] Although the custom wardrobe has only entered the country in recent years, it has quickly become popular. According to the designer, the reason why the whole wardrobe is favored by consumers is that it can be industrialized and tailored, and it is environmentally friendly, fashionable and professional.
Four standards to judge the wardrobe sheet to enhance your choice of taste
However, the core material used as a custom closet is the most important part of the custom wardrobe and the most used part. The quality and workmanship of the panel used by the wardrobe manufacturer directly determines the quality of the overall wardrobe.
So, how to choose a custom-made wardrobe sheet? The following four suggestions, I hope to help you choose a good quality wardrobe product.
Wardrobe plate judges face
How to judge the plate of the custom closet? Generally, look at the cut surface of the sample. From the cut surface, the blockboard is two or four layers of veneers (also thickened using four or more veneers) close to the solid wood core. The quality of the blockboard has a flat cut surface with no gaps; the MDF is made of fine fibers, and the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough and the weight is light. The poor quality can even be seen with small pores; the multi-layer board is made of a plurality of veneers, usually three or five layers.
Wardrobe panels must comply with national testing standards
Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health.
Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.
Wardrobe sheet quality depends on the veneer
Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches.
These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance.
Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.
Wardrobe work to see the surrounding edge
Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them.
Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
With the wardrobe's leading design concept, Zhihua, while pursuing the high-quality manufacturing process of the wardrobe, pays more attention to the personalized overall solution provided by the high-end family.
Small Foldable Table,Folding Coffee Table,Round Plastic Tables,Round Folding Table
Zhejiang Lifan Furniture.Co.,Ltd , https://www.lffoldingtable.com